Deploy mobile baggage and parcel inspection at any location. Se|f—contained Mobile Screening integrated Large Tunnel X-ray Three Operational Modes Rapid Deployment The Rapiscan Mobi|eCheck*” 636SV is a state of the art self-contained mobile X-ray screening unit with a large tunnel opening. With an innovative design the ability to rapidly deploy baggage and parcel inspection at any location with one complete unit is possible. The Rapiscan Mobi|eCheck 636SV can be deployed and operated in three different modes, from either side of the van or in a pass through mode. Cabinet X-Ray Physical Specifications Tunnel Size: 1,016 mm (W) X 1,016 mm (H) (40 X 40 in.) Conveyor Speed: 0.20 m/sec (40 ft./min) Conveyor Max Load: 165 Kg (364 lbs) evenly distributed Conveyor Height: 772 mm (30.4 in.)
X-Ray Generator and Image Performance Steel Penetration: 27mm guaranteed; 29 mm typical Wire Resolution: 38 AWG guaranteed; 40 AWG typical Generator Cooling: Sealed oil bath with forced air Anode Voltage: Operating at 160KV Tube Current: 1.0 mA typical
Operating Environment Storage Temperature: -20°C to 50°C Operating Temperature: 0°C to 40°C Relative Humidity: 5 to 95% non-condensing
Health & Safety Rapiscan Systems Inc. cabinet x-ray products comply with all applicable US FDA and equivalent international regulatory agency requirements, contained in the cabinet x-ray radiation safety performance standard [21 CFR 1020.40] and the general performance standard [21 CFR Part 1010]. Rapiscan Systems Inc. certifies each cabinet x-ray product has a maximum radiation emission leakage of less 0.1 pSv/hr (0.1 mR/hr) measured 5 cm from all external surfaces of the cabinet x-ray system.
|