Deploy mobile baggage and parcel
inspection at any location.
Se|f—contained Mobile Screening
integrated Large Tunnel X-ray
Three Operational Modes
Rapid Deployment

The Rapiscan Mobi|eCheck*” 636SV is a state of the art self-contained mobile X-ray screening unit with a large tunnel opening. With an innovative design the ability to rapidly deploy baggage and parcel inspection at any location with one complete unit is possible. The Rapiscan Mobi|eCheck 636SV can be deployed and operated in three different modes, from either side of the van or in a pass through mode.

Cabinet X-Ray Physical Specifications
Tunnel Size: 1,016 mm (W) X 1,016 mm (H) (40 X 40 in.)
Conveyor Speed: 0.20 m/sec (40 ft./min)
Conveyor Max Load: 165 Kg (364 lbs) evenly distributed
Conveyor Height: 772 mm (30.4 in.)

X-Ray Generator and Image Performance
Steel Penetration: 27mm guaranteed; 29 mm typical
Wire Resolution: 38 AWG guaranteed; 40 AWG typical
Generator Cooling: Sealed oil bath with forced air
Anode Voltage: Operating at 160KV
Tube Current: 1.0 mA typical

Operating Environment
Storage Temperature: -20°C to 50°C
Operating Temperature: 0°C to 40°C
Relative Humidity: 5 to 95% non-condensing

Health & Safety
Rapiscan Systems Inc. cabinet x-ray products comply with all applicable US FDA and equivalent international regulatory agency requirements, contained in the cabinet x-ray radiation safety performance standard [21 CFR 1020.40] and the general performance standard [21 CFR Part 1010]. Rapiscan Systems Inc. certifies each cabinet x-ray product has a maximum radiation emission leakage of less 0.1 pSv/hr (0.1 mR/hr) measured 5 cm from all external surfaces of the cabinet x-ray system.