CARGO AND VEHICLE INSPECTION

Rail-mounted Gantry
Automated Scanning
High Energy X-ray Inspection
Easily Relocated

The Rapiscan Eag|e® G4500 is a cargo inspection system that incorporates proven high energyX-ray imagingtechnology in a rail-mounted gantryconfiguration. It is capable of rapid, automated scanning of dense cargo and vehicles. The 4.5 MV linear accelerator X-ray generator and X-ray detectors are mounted on an electric—powered gantry that runs on rails. The system automatically scans unoccupied vehicles parked between the rails as the gantry moves over them. The length of the rails determines the number of vehicles that can be scanned in a single pass. The gantry is remotely operated from a nearby office, where the X-ray images are sent for examination and evaluation with Rapiscan’s Cargo Viewer software. The Rapiscan Eagle G4500 is designed for operation by a minimum number of personnel. Therefore, it is well—suited to cargo screening at entrances to critical facilities and border crossings, as well as seaports. The unit can also be readily disassembled and shipped to another location, requiring only that a set of rails be laid at the new site.

• Rail-mounted gantry inspection system
• Automatically scans densely loaded containers and vehicles
• Rapid scanning supports high throughput
• 4.5 MV X-ray imaging system
• 300 mm of steel penetration
• Disassemble and reassemble at a new site in a few weeks
• Optional Rapiscan VEDS neutron inspection system
• Built—in radiation safety that meets international and local standards
• Manufactured to US and CE certification standards