• Photo Title 1
  • Photo Title 2
  • Photo Title 3
  • Photo Title 4
  • Photo Title 5
Rapiscan GaRDSGantry

CARGO AND VEHICLE INSPECTION

Automated Scanning
High Throughput
Small Footprint
cost Effective

The Rapiscan GaRDST'V' Gantry (Gamma-Ray Detection System) is a cost effective,safe, and reliable system for the inspection of trucks, vehicles and cargo containers for concealed contraband, smuggled goods, and for manifest verification. The Rapiscan GaRDS Gantry is available in two models: Enhanced Penetration and Standard.

  • The Rapiscan GaRDS Gantry features:
  • Easy to use — requires only one operator.
  • High throughput — can scan up to 60 trucks per hour.
  • Scan single or multiple cargo arranged in a row, including a camera
  • snapshot of scanned vehicle.
  • The moving gantry allows the scanning of stationary vehicles, containers, air cargo and pallets.
  • Optimized source to detector distance enhances penetration performance.
  • Complete imaging of cars and trucks without corner cutoff of containers or cargo.
  • Full image of truck or container contents.
  • System moves on rails and can be relocated.
  • Minimal infrastructure is easily integrated into existing facilities.
  • Automated scanning operation, no manual controls needed.
  • Designed for all weather conditions.
  • Safe — low radiation levels.

CUSTOMER SUPPORT SERVICES
Our team is dedicated to providing a prompt, effective and personalized response that exceeds your expectations. With spare parts inventory and skilled technicians all over the world, you can be certain Rapiscan Systems will always be prepared with a solution to address your requirements. By measuring response time, parts delivery and support status, our team embraces a customer focused philosophy to ensure continual improvement in customer support, products and services.

 

SPECIFICATIONS Model
  Enhanced Penetration Standard
Source Cobalt-60 Cesium-137
Penetration (Steel)* 180mm (7.08 in) guaranteed
190mm (7.48 in) typical
110mm (4.33in) guaranteed
120mm (4.72 in) typical
  All Model
Wire Resolution* 5mm (0.20 in)
Spatial Resolution* 11mm (0.43 in)
Contrast Sensitivity* 2% (A steel thickness of 2mm [0.08 in]) maybe imaged behind 100mm [3.93]
of steel with the enhanced penetration model
Throughput 30-60 trucks per hour
Scan Speed Three user selectable speeds of 0.2, 0.3, 0.4 m/s
Power Requirements 240V, 50Amps 50 or 60Hz
Detector Array Folder "L" shaped detector array for total truck imaging without corner cutoff
Tunnel Height 4.8m (15.7ft)
Tunnel Width 4.1m (13.4ft)
Target Scan Size Typical truck size: 4.5m (14.8ft) High x 3m (9.8ft) Wide
Minimum Scan High Lower than 355mm (14 in)
Scanning Modes Forward or Reverse scanning direction, Single or Multiple vehicales or cargo,
10c oblique scanning angle to enhance false wall detection
Temperature 0-50c Standard, -30c to 50c (-22F to 122F) with Cold Weather Kit Option
Relative Humidity 0-98% (Operates in rain and snow conditions)