• Photo Title 1
  • Photo Title 2
  • Photo Title 3
  • Photo Title 4
  • Photo Title 5
Rapiscan GaRDS Mobile

CARGO AND VEHICLE INSPECTION

Self-Contained
Mobile
Fast Set-Up Time
Modular Design

The Rapiscan GaRDST'V' Mobile (Gamma-Ray Detection System) is a highly advanced, Self—contained, mobile inspection system for screening trucks, cargo containers and passenger vehicles for contraband and explosives.
The Rapiscan GaRDS Mobile features:

  • Inspection throughput of 1 — 3 trucks with containers per minute at variable scanning speeds.
  • Performs both mobile and stationary scanning on drivers or passenger's side and at 0° or 10° offset.
  • Scan single or multiple cargo arranged in a row, including a camera snapshot of scanned vehicle.
  • Self—contained with on—board generator and capable of operating on shore power.
  • Complete imaging of cars and trucks without corner cutoff of containers.
  • Optimized source to detector distance enhances penetration performance.
  • Designed for all weather operation.
  • Source and Detectors are on a single boom for simple, reliable and dual sided deployment.
  • Designed to travel on local and international roadways.
  • Modular design enables system to be mounted on a domestically available truck chassis.
  • 0perator’s station is within an extended truck cab with heating and air conditioning environmental control.
  • Set—up time is approximately 10 minutes.

CUSTOMER SUPPORT SERVICES

Our team is dedicated to providing a prompt, effective and personalized response that exceeds your expectations. With spare parts inventory and skilled technicians all over the world, you can be certain Rapiscan Systems will always be prepared with a solution to address your requirements. By measuring response time, parts delivery and support status, our team embraces a customer focused philosophy to ensure continual improvement in customer support, products and services.

SPECIFICATIONS
Source Cobalt-60
Steel Penetration 180mm (7.08 in) guarateed, 190mm (7.48 in) typical
Wire Resolution 11m (0.43 in)
Contrast Sensitivity 2% (A steel thickness of 2mm [0.08 in]) maybe imaged behind 100mm [3.93 in]
Throughput 1-3 trucks per munite
Power Onboard generator, capable of switching to shore power
Detector Array Folded "L" shape detector array for total truck imaging in a single scan without corner cut-off
Tunnel Height 4.8m (15.7 ft)
Tunnel Width 4.1m (13.4 ft)
Target Scan Size Typical truck size: 4.5m (14.8 ft) Height x 3m (9.8 ft) Wide
Minimum Scan Height Lower than 355mm (14 ft) for trucks and 255mm (10 in) for cars
Scanning Modes Forward of reverse scan directions
Stationary scanning capability
Single or multiple scan capability
Driver of passenger side scanning 0c of 10c oblique detector angle selection
Truck, Mid and Automobile scanning heights
Weight Less than 11,974kg (26,000 lbs)
Temperature 0-50c Standard, -30c to 50c (-22c F to 122c F) with cold weather kit option
Relative Humidity 0-98% (operates in rain and snow conditions)