The Rapiscan Eagle"“ C02, Occupied Vehicle Inspection System is designed to scan cars and small vehicles to verify the contents and to identify the presence of hidden contraband, such as weapons, explosives and narcotics.
Physical Specifications |
Inspection Field of view: |
0.25m to 2.8m tall x 2.8 m wide |
Scan Orientation: |
90° to inspected object |
Set-up: |
10 minutes in standard operating environment; longer in colder temperatures |
Scan Modes: |
Drive Through system with integrated traffic management |
Scan Direction: |
Forward or Reverse |
Crew: |
Single Image Inspector, optional additional inspectors for increased inspection throughput and optional ground marshal |
Scan Speed: |
3-8 km/h drive through speed |
X—Ray Generator and Image Performance* |
X—Ray energy: |
225 KV X-ray Tube |
Steel Penetration: |
30mm Steel in Air |
Wire Resolution: |
1mm in air. |
Spatial Resolution: |
3mm |
Contrast % @100mm: |
10% |
Operating Environment |
Operational Temperature: |
—10°C to +40°C —40°C with optional cold weather package +55°C with optional hot weather package |
Relative Humidity: |
5 to 95% non-condensing |
Radiation Safety |
Dose to Crew: |
3 1 mSv/yr; does not exceed allowable radiation dose |
Dose to Bystanders: |
s 1 mSv/yr; does not exceed allowable radiation dose |
Rapiscan Eag|e® C02 Standard Features Drive—through scanning of occupied vehicles Radiation safe for vehicle occupants, bystanders and operators 3 m (W) x 3.3 m (H) inspection tunnel New scan control system to ensure constant image quality Easy—to—use Rapiscan Cargo Viewer software Meets radiation safety standards Easy to maintain
Rapiscan Eagle@ C02 Options Automated capture of the license plate in most countries Cold and/or hot weather package for expanded operational environment Inspection office with amenities
|